How to clean an algae infested pool

Having a pool party this weekend but the water’s looking green? Once the chemistry of your pool is not right, the production of algae is stimulated, causing the slimy green color in the water that makes the pool unfit for swimming. Algae infestation can be such a big pain in the rear, especially when you want to be spending time swimming in your inground swimming pool instead of cleaning it.

Once the algae has started to grow, the need to be thorough in cleaning and treating the pool until the algae is totally removed and the water becomes clean once again is essential. Especially for inground swimming pools, the work should be taken seriously to keep your pool at its best for longer.

Killing the algae

No matter what kind of algae infestation your pool is suffering from, chlorine is every pool owner’s best friend in defeating all types of algae.

Testing PH Levels. Have the water tested to make sure that the water is in its proper ph and alkalinity levels, this will make sure your pool can hold the chlorine.

Turn your filter on, making sure to keep it running 24/7.

Shocking the Pool. Determine the algae infestation in the pool. Depending on the state your pool is in, it will determine how much chlorine you’ll use. Calcium hypochlorite is used to chlorinate algae infested water.

  • Is it light green? Do you see little black or yellow algae? If yes, you may have to double shock your pool. To do this, use 2 lbs of shock per every 10,000 gallons of water in your pool.
  • Is it dark green? Do you see a lot big black and yellow spots of algae? If yes, you should triple shock the pool using 3 lbs of shock per every 10,000 gallons of water.
  • Is it black with serious yellow algae infestation? You’ll need to quadruple shock the pool to get rid of the algae using 4 lbs of shock for every 10,000 gallons of water.

Shock your pool based on the right amount as indicated above. Be sure you use a bucket of water to pre-dissolve the shock before distributing it throughout the pool. Cover the whole area as best you can. Let it run overnight.

Note: It is best to shock pools at night since it helps in making the job more efficient. Sunlight reduces the intensity of the shock to the pool (1 part per million of unstabilized chlorine)

Keep using a brush in your pool, making sure to clean the hard to reach areas like creases and ladders in your inground swimming pool. Ensure that the alkalinity pH, and chlorine are maintained in a good level throughout this process. This will be the crucial part while cleaning your pool.

Cleaning up. You might notice that the water has become cloudy, this is partly because of the dead algae. Just keep the pump and the filter running until the water clears up.

Keeping your pool free from algae requires your dedication and devotion. With the right chemicals and regular proper maintenance, your pool will be ready for swimming in no time.

If you’re looking for easy to clean and worry free pools, do check myfibreglasspooleasy.com.au to find the best option.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s